Other Tubes
MBP PCR Tubes (8)
Molded from 100% virgin polypropylene, MBP PCR tubes feature thin walls for optimal heat transfer and caps that seal securely to minimize evaporation. We take the time to carry out extensive quality inspections to ensure consistent performance. Available with dome or flat…
MBP EasyStart™ PCR Mix-in-a-Tube (6)
MBP’s patented EasyStart™ PCR Mix-in-a-Tube features thin-walled reaction tubes containing pre-aliquoted buffer, MgCl 2and dNTPs sealed under a wax layer. Concentrations have been optimized so as to be compatible with most commercial polymerases and a wide range of templates. Just add your…
MBP HotStart ®Storage & Reaction Tubes (11)
HotStart® PCR is made easy with MBP’s HotStart reaction tube, which features a pre-adhered wax bead inside each tube. Our patented HotStart tubes, available in a variety of sizes, let you store your custom PCR mix under a wax layer to save…
Simport C571 & C572 - 30 and 50 ml Sample Tubes (4)
Tube made of polypropylene / Cap made of polyethylene Conical bottom tubes with self-standing base graduated from 10 to 30 ml and 10 to 50 ml respectively in 5 ml increments. Chemically resistant and shatterproof, they are supplied with a leakproof screw…
Simport T400 (6)
Made of either polystyrene or polypropylene Ideal for use in bacteriology, RIA, coagulation and other routine laboratory procedures. Simport uses no mold release agents that could cause errors and interferences in RIA tests. Precision molding with virgin thermoplastics ensures that our tubes…
Simport T400-3S & -3AS (2)
Made of either polystyrene or polypropylene These natural color 12 x 75 mm tubes are identical to T400-3 & T400-3A but are neatly packaged with the same orientation in boxes of 125.
Simport T400-34 (3)
Made of either polystyrene or polypropylene These tubes are identical to our T400 and T400-3 but are all aligned and packaged in boxes of 250 in order to fit into stainless steel dispensers.
Simport T420 (2)
Tubes made of either polystyrene or polypropylene These centrifuge tubes are also useful for collecting and transporting biological specimens. Leakproof characteristics are ensured by a flat top plastic screw cap with an inner sealing lip. Tubes are made of translucent polypropylene or…
Simport T500 (4)
Made of polypropylene High quality screw cap sample tubes manufactured of t rans lucent autoclavable polypropylene. Tube with internal threads. Caps are supplied with or without a silicone washer, to ensure a positive leakproof seal at all temperatures. A 11/4 turn of…
Simport T501 (8)
Made of polypropylene Designed for the storage and transportation of biological material. Manufactured from non-toxic polypropylene, the tube provides strength and clarity and exhibits some unique design features. The vial has external threads, providing a smooth and uniform inner surface, thus reducing…
Simport T550 & T552 (5)
Tube made of polypropylene / Cap made of polyethylene Designed for storage and transportation of biological material. Manufactured from non-toxic polypropylene, tubes provide strength and clarity and exhibit some unique design features. Five sizes are available from 5 to 30 ml. The…
Simport T552TP (5)
Tube made of polypropylene / Cap made of polyethylene At last, a tamper evident sample and transport tube design, incorporating all the features and benefits of the Simport line of the sample tube family. They are ideal for all applications requiring a…
Simport T325-1 and -2 - Amplitube™ (5)
Made of polypropylene Designed for oil-free operation, these tubes are made of transparent superior quality grade polypropylene for better viewing of the contents. Their ultrathin wall design will ensure rapid thermal transfer and a significant reduction in cycle and PCR reaction time.…
Simport T325-1V and -2V - Amplitube™ (5)
Made of polypropylene Ideal tube design when centrifugation is necessary. These tubes are identical to the T325-1 & -2 Series but without a contamination shield. Frosted writing surface for sample identification. See description above for further details. Packaged in tamperproof resealable safety-lock…
Simport T325-3 and -4 - Amplitube™ (5)
Made of polypropylene Also designed for oil-free operation, the inside of these tubes has a polished surface, a conical shape and a round bottom for maximum sample recovery. They offer optimum contact with thermal cycler blocks. Their ultrathin wall design will ensure…
Simport T325-12 - Amplitube™ (5)
Made of polypropylene This thin wall 0.2 ml tube is very useful when processing smaller volumes. It offers optimum contact with thermal cycler blocks. The ultrathin wall will ensure rapid thermal transfer and a significant reduction in cycle and PCR reaction time.…
Simport T320-2 and -3 - Amplitube™ (10)
Made of polypropylene This more convenient 0.2 ml tube strip incorporates individually attached caps. No need to carry two separate components in inventory. The strip includes 8 integral 0.2 ml tubes with ultrathin sidewalls and bottoms for more uniform and efficient temperature…
Simport T320 and T321 - Amplitube™ (5)
Made of polypropylene Simport Reaction Strips include 8 or 12 integral 0.2 ml tubes with ultrathin sidewalls and bottoms for more uniform and efficient temperature transfer, therefore reducing PCR reaction time in most 96-well “V” bottomed thermal cyclers such as MJ Research,…
Simport T322 - Amplitube™ (5)
Made of polypropylene Designed for oil-free operation, these reaction strips are identical to T320 Series but include already attached 8-cap strips molded with a living hinge to facilitate opening and closing. They are manufactured under strict quality control supervision to ensure reproducible…
Simport T332 - Micrewtube® (15)
Made of polypropylene The O-ring secured in the top of the cap ensures a positive leakproof seal, time after time, keeping the integrity of small samples under even the most adverse conditions. This series of tubes is available either plain or with…
Simport T334 - Micrewtube® (16)
Made of polypropylene Similar to the T332 Series but without the “tethered cap” feature. This series of tubes is available either plain or with printed graduations and white marking area for sample identification. The caps do not have the attachment loops for…
Simport T335 - Micrewtube® (14)
Made of polypropylene This series of tubes is also available either plain or with printed graduations and white marking area for sample identification. O-ring seal screw caps are unattached but incorporate a flat top which provides a writing surface. These flat surfaced…
Simport T336 - Micrewtube® (15)
Made of polypropylene Cap made of polyethylene The flexible sealing lip inside the cap ensures a positive leakproof seal under even the most adverse conditions. This deep internal lip fits snugly against the interior wall of the tube preventing the contents from…
Simport T339 - Micrewtube® (16)
Made of polypropylene Cap made of polyethylene This series of tubes is available either plain or with printed graduations and white marking area for sample identification. Lip seal screw caps are unattached but incorporate a flat top which provides a writing surface.…
Simport T341T - Micrewtube® (4)
Made of polypropylene Available in plain or graduated configuration, the latter being provided with a white marking area for sample identification. Can be used at extreme temperatures from -196 °C to +121 °C. Certified RNase-, DNase-, Pyrogen- and DNA-free.
Simport T341TPR - Micrewtube® Graduated (5)
Made of polypropylene For your special needs, these tubes are identical to the T341 Series but are graduated and are provided with a white marking area for sample identification. Can be used at extreme temperatures from -196 °C to +121 °C. Certified…
Simport T341TBR - Micrewtube® For Light Sensitive Material (5)
Made of polypropylene These ungraduated tubes are identical to series T341 but their dark brown color allows them to be used when storing light-sensitive material. Can be used at extreme temperatures from -196 °C to +121 °C. Certified RNase-, DNase-, Pyrogen- and…
Simport T330-75N (1)
Made of polypropylene This 5 ml Simport Centrifuge Tube offers superb quality and performance at an affordable price. The tube features an extended lip for easy opening. Marked graduations and frosted labeling panels on tube and cap for easy writing and identification.…
Simport T330LST (4)
Made of polypropylene The special type of plastic used provides these tubes with a low adhesion surface and optimum sample yield. No lubricant (such as silicone) is necessary, thereby eliminating the danger of sample contamination. It is also graduated and designed to…
Stockwell 15ml Centrifuge Tube and Plug Cap (7)
These 15ml conical centrifuge tubes, made from premium polystyrene or polypropylene, offer results of precision and accuracy, Features include: Plug caps made from low-density polyethylene with leakproof seals. Accurate graduations for precise results. Various packaging configurations.
Globe EZ-Rate™ ESR Pipette (for direct testing in 13mm blood collection tubes) (3)
For direct testing in 13mm blood collection tubes No need to transfer blood No additional vials, tubes or transfer pipettes necessary Accurate and reproducible results Fibrous barrier protects user from hazardous aerosols EZ-Rate™ offers a simple, safe, economical and highly-accurate method for…
Globe PCR* Tubes (6)
Thin wall Polymerase Chain Reaction tubes help accelerate uniform well-to well heat transfer, thus leading to shorter cycle times. They also assist in magnifying critical DNA fragments. Designed for an optimal fit in all commonly used thermal cyclers, these tubes meet or…